V3 consoles
model scph-3xxxx + 10 screws

Soldering is for research...

Lusifer mod installation, requires only 1 Philips screwdriver to open the console and 10 minutes!

It is strongly recomended to be done by specialized technics, because you have to break the guarantee shield and lose your guarantee!

-- Step#1

...connect Eject-Reset button to Lusifer mod

Unplug Eject-Reset button from the uper protective cap of PS2.

Disconnect the Ribbon cable

Use the extra Ribbon Cable to connect
L-mod connector#1 <-> Reset-Eject button

Plug the Eject-Reset button back in his place

-- Step#2

...connect Mainboard to Lusifer mod

Connect the Ribbon Cable
from mainboard <-> L-mod connector#2

-- Step#3

...connect G1-Plug In

Unscrew 2 screws that hold CD-Rom

Lift the CD-Rom very carefully, like the photo

Connect
short edge of G1-Plug In <-> to mainboard
and
long edge of G1-Plug In <-> to Lusifer mod.

Place Lusifer mod - ENJOY YOUR GAME!