--> Quick Tips

- You can easilly recognise this version of scph-3000x model, by:
1. The missing electric warning hazard.
2. If you count 10 screws in the bottom cap.
- There are 2 types of mainboard:
1. Gap-version
2. No Gap-version
- Laser Eye, is compatible with all other 1st Generation consoles, and spare-parts are available.

DO NOT solder in bios points, cause this may effect in your consoles' mainboard.
DO NOT use any CD-backups over 650 mb, you may tune off your laser adjustment.

- V3 consoles - (model scph-3000x without electric warning hazard and 10 screws)

no electric warning hazard.
WATCH OUT!

--> Mainboard type#1

This type of mainboard is compatible with all V3 consoles. It is a 3 pieces mainboard.
There are 2 versions of bios:
- Gap
- No Gap

--> Cd-rom type#1

This type of Cd-rom is compatible with all V3 consoles.

--> Laser Eye type#1

This type of Laser eye is compatible with all 1st Generation consoles.

--> Power Supply type#1

This type of power supply is compatible with all V3 consoles.

--> Heat Sink type#1

This type of Heat sink is the havier of all.

--> Ribon cable type#1 (long one)

The Ribbon cable of V3 consoles, is the long one (22cm).

--> Cooling System type#1

This type cooler is compatible with all V3 consoles.

1. Insert your model (SCPH-xxxxx)
2. Select your system (PAL-NTSC)
3. Insert your serial (f.e. c256731)
4. Select your version optional V3 V4 V4R V5 V6 V6R