/ home / Devil mod / Installation Guide

... Open your Xbox .

The installation of Devil mod v0.11,
requires to open your console,
and lose your quarrantee.

Required tools, are a T10, T20 screwdriver,
and a good solder iron.
--------------------------------------------------
- Diagrams of Devil mod
--------------------------------------------------

Unscrew these 6 screws, with a T20 screwdriver.

Lift the upper protective cap,
from the back side of Xbox.

Unplug the 2 wads,
that are connected to the Hard Drive.

Unscrew the screw that is connecting the Hard Drive to the CD-Rom, with a T10 screwdriver.

Unscrew the 2 screws that are holding CD-Rom,
with a T10 screwdriver.

Unplug CD-Rom from the mainboard.

Disconnect the 3 wads from the mainboard,
the board of joystic, and unscrew all the screws from the mainboard with T10 screwdriver.

Lift the motherboard.

The installation of Devil mod, requires the right tools and patience...
--------------------------------------------------
- Diagrams of Devil mod
--------------------------------------------------