Lusifer mod: No PS2 can RESIST!
Plug&Play smt technology
Devil mod: No Xbox can RESIST!
Plug&Solder smt technology
GR version

/ home / Installation / SCPH-3xxxx / V4 &V4R consoles
 
Installation of Lusifer mod in V4 & V4R consoles - No Configuration!

 

Soldering is for research...

Loss of PS2 Guqrrantee!

Lusifer mod installation, requires only 1 Philips screwdriver to open the console and 10 minutes!

It is strongly recomended to be done by specialized technics, because you have to break the guarantee shield and lose your guarantee!

-- Step#1

...connect Eject-Reset button to Lusifer mod

click to Enlarge

Disconnect the Ribbon cable from the mainboard
 
click to Enlarge

Connect it to Lusifer mod connector#1
 

-- Step#2

...connect Mainboard to Lusifer mod

click to Enlarge

Connect with the extra Ribbon Cable
mainboard <-> L-mod connector#2

 

-- Step#3

...connect G1-Plug In

click to Enlarge

Disconnect the wad with red-black wires from mainboard
 
click to Enlarge

Connect it in G1-Plug In
 
click to Enlarge

Connect
short edge of G1-Plug In <-> to mainboard

 
click to Enlarge

Connect
long edge of G1-Plug In <-> to Lusifer mod.
 
click to Enlarge

Place Lusifer mod - ENJOY YOUR GAME!
 
Lusifer full: Diagrams for V4 & V4R consoles - 3 points to solder!

Lusifer full requires 3 extra points to solder,
that can be found in the existing neo2.2 diagrams (pin2, pin4, pin7).


------------------
- Diagrams
------------------
 Soldering in PS2 mainboard,
may cause a tune off to your Laser Adjustment.